Aggravated By False Alarms? Follow These Tips For Using Home Security Motion Sensors In Evanston
Have you ever been startled in the heart of the night by a false alarm caused by a home security motion sensor? Having your sleep interrupted is bad enough, but it’s even worse when you cannot identify why the alarm went off. Thankfully, false alarms are easy to avoid. Try these simple suggestions for using motion-activated devices and see how the proper placement and maintenance will help significantly in limiting false alarms.
How To Minimize Motion Detector False Alarms In Evanston
An essential part of your home’s protection, motion sensors frequently get an unfavorable reputation because of false alarms. Although motion sensors are prevalent in various implements like lights and surveillance systems, false alarms are usually attributed to standalone units perched in corners of rooms. To prevent false alarms, avoid putting them in spots where they could be tripped by the following:
- Pets climbing on furniture
- Turning of ceiling fans
- Drapery swaying from your HVAC fan
- Temperature shifts because of heating equipment or the sun’s rays
You also should be diligent about upkeep. Weak batteries will decrease functionality and ultimately lead to outages. Hardwired units may have a damaged or pinched wire. You also must clean periodically, as certain creepy crawlies like to hide out in corners. When you’re tidying up, verify the motion sensor housing is securely attached.
Thankfully, many leading systems can minimize false alarms from pets by ignoring animals below 2 ½ feet tall and up to 85 pounds. Review what devices can do before buying to make certain you have the options you need.
What’s The Best Positioning For Evanston Motion Sensors?
Keep home security motion sensors high on walls so they can monitor as much of your room as possible, and that includes doors and windows. While positioning them in close proximity to access points may seem sensible, this location may reduce the total coverage area. Additionally, situating them near a warmer, sun-splashed window might trip sensors that operate by noticing heat fluctuations. Respectable home security installers will inform you of proper placement.
How To Use Your Motion Sensors
Identifying intruders is the primary job of motion detectors, but there are a range of other reasons to get them. Here are just a few:
- Energy conservation. Motion-detection lights save energy by brightening only when occupants are in the area. You may even connect your sensor to a smart thermostat and change temperatures based on whether people are home.
- Track kids. Motion detectors can alert you when your children arrive home from school.
- Activate indoor video cameras. You can configure your inside cameras to kick on if a motion sensor identifies a disturbance.
When implementing an advanced home protection package, you can program all sorts of custom automation with motion detectors.
Get Motion Sensors As Part Of Your Full-Featured Home Security Package in Evanston
Get the robust protection you want for your household with a full-featured home security installation in Evanston from Secure24 Alarm Systems. Our dependable motion-detecting equipment can be automated with other integrated devices like cameras, lights, and thermostats. Contact (847) 268-7321 today to upgrade the safety of your home.